Latest 400-351 CCIE Wireless PDF Questions

The Cisco CCIE Wireless Written Exam is a 2-hour test that will validate that a wireless engineer has the expertise to plan, design, implement, operate, and troubleshoot complex enterprise WLAN networks.

Written Exam Topics v3.0  (Recommended for candidates scheduled to take the test BEFORE July 25, 2016)

Written Exam Topics v3.1  (Recommended for candidates scheduled to take the test ON July 25, 2016 and beyond)

Just notice the time of the test. We also provide the latest 400-351 CCIE Wireless pdf questions to help you pass the 400-351 CCIE Wireless Written Exam.

1.0 Planning & Designing WLAN Technologies 14%

1.1 Describe WLAN organizations and regulations
1.2 Describe IEEE 802.11 standards and protocols
1.3 Plan & design wireless solutions requirements
1.3.a Translate customer requirements into services and design recommendations
1.3.b Identify ambiguity and/or information gaps
1.3.c Evaluate interoperability of proposed technologies against deployed IP network infrastructure & technologies
1.3.d Select an appropriate deployment model
1.3.e Regulatory domains and country codes
1.4 RF planning, designing and validation
1.4.a RF Design / Site survey
1.4.a [i] Define the tasks/goals for a preliminary site survey
1.4.a [ii] Conduct the site survey
1.4.a [iii] Determine AP quantity, placement and antenna type
1.4.b Architect indoor and outdoor RF deployments
1.4.b [i] Coverage
1.4.b [ii] Throughput
1.4.b [iii] Voice
1.4.b [iv] Location
1.4.b [v] HD
1.4.c Construct an RF operational model that includes:
1.4.c [i] Radio resource management (Auto-RF, manual, hybrid, TPC and DCA)
1.4.c [ii] Channel use (radar, non-WiFi interference)
1.4.c [iii] Power level, overlap
1.4.c [iv] RF profiles
1.4.d Validate implemented RF deployment

2.0 Configure and Troubleshoot the Network Infrastructure 10%

2.1 Configure and troubleshoot wired infrastructure to support WLANs
2.1.a VLANs
2.1.b VTP
2.1.c STP
2.1.d Etherchannel
2.1.e HSRP
2.1.f VSS
2.1.g Stacking
2.2 Plan network infrastructure capacity
2.3 Configure and troubleshoot network connectivity for:
2.3.a WLAN clients
2.3.b WLCs
2.3.c Lightweight APs
2.3.d Autonomous APs
2.4 Configure and troubleshoot PoE for APs
2.5 Configure and troubleshoot QoS on the switching infrastructure
2.5.a MQC
2.5.b Mls qos
2.6 Configure and troubleshoot multicast on the switching infrastructure
2.6.a PIM-SM
2.6.b Auto-RP
2.6.c Static-RP
2.6.d IGMP
2.6.e IGMP snooping
2.6.f MLD
2.7 Configure and troubleshoot IPv4 connectivity
2.7.a Subnetting
2.7.b Static routing
2.7.c Basic OSPF
2.7.d Basic EIGRP
2.8 Configure and troubleshoot basic IPv6 connectivity
2.8.a Subnetting
2.8.b Static routing
2.8.c Basic OSPFv3
2.8.d Basic EIGRP address families
2.9 Configure and troubleshoot wired security
2.9.a ACLs (v4/v6)
2.9.b dot1X
2.9.c Port-security
2.9.d SXP, SGT
2.10 Configure and troubleshoot network services
2.10.a DNS
2.10.b DHCPv4 / DHCPv6
2.10.c NTP, SNTP
2.10.d SYSLOG
2.10.e SNMP
2.10.f CDP, LLDP
2.10.g SDG. mDNS

Leave a Reply

Your email address will not be published. Required fields are marked *


*