300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

Cisco Certified Network Professional (CCNP) Routing and Switching certification validates the ability to plan, implement, verify and troubleshoot local and wide-area enterprise networks and work collaboratively with specialists on advanced security, voice, wireless and video solutions. The CCNP Routing and Switching certification is appropriate for those with at least one year of networking experience who are ready to advance their skills and work independently on complex network solutions. Those who achieve CCNP Routing and Switching have demonstrated the skills required in enterprise roles such as network engineer, support engineer, systems engineer or network technician. The routing and switching protocol knowledge from this certification will provide a lasting foundation as these skills are equally relevant in the physical networks of today and the virtualized network functions of tomorrow.

Required Exam(s)

300-101 ROUTE Implementing Cisco IP Routing (ROUTE)

300-115 SWITCH Implementing Cisco IP Switched Networks (SWITCH)

300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

When taking Cisco 300-135 TSHOOT test, you need to answer 15-25 questions in 120 minutes for your Cisco CCNP Routing and Switching certification. Troubleshooting and Maintaining Cisco IP Networks (TSHOOT 300-135) is a 120-minute qualifying exam with 15‒25 questions for the Cisco CCNP Routing and Switching certification. The TSHOOT 300-135 exam certifies that the successful candidate has the knowledge and skills necessary to:
• Plan and perform regular maintenance on complex enterprise routed and switched networks
• Use technology-based practices and a systematic ITIL-compliant approach to perform network troubleshooting

300-135 TSHOOT Online Test – Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

Share more 300-135 exam topic, read these topics and prepared 300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) test easily.

1.0 Network Principles 5%

1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution

2.0 Layer 2 Technologies 40%

2.1 Troubleshoot switch administration
2.1.a SDM templates
2.1.b Managing MAC address table
2.1.c Troubleshoot Err-disable recovery
2.2 Troubleshoot Layer 2 protocols
2.2.a CDP, LLDP
2.2.b UDLD
2.3 Troubleshoot VLANs
2.3.a Access ports
2.3.b VLAN database
2.3.c Normal, extended VLAN, voice VLAN
2.4 Troubleshoot trunking
2.4.a VTPv1, VTPv2, VTPv3, VTP pruning
2.4.b dot1Q
2.4.c Native VLAN
2.4.d Manual pruning
2.5 Troubleshoot EtherChannels
2.5.a LACP, PAgP, manual
2.5.b Layer 2, Layer 3
2.5.c Load balancing
2.5.d EtherChannel misconfiguration guard
2.6 Troubleshoot spanning tree
2.6.a PVST+, RPVST +, MST
2.6.b Switch priority, port priority, path cost, STP timers
2.6.c PortFast, BPDUguard, BPDUfilter
2.6.d Loopguard, Rootguard
2.7 Troubleshoot other LAN switching technologies
2.7.a SPAN, RSPAN
2.8 Troubleshoot chassis virtualization and aggregation technologies
2.8.a Stackwise

3.0 Layer 3 Technologies 40%

3.1 Troubleshoot IPv4 addressing and subnetting
3.1.a Address types (Unicast, broadcast, multicast, and VLSM)
3.1.b ARP
3.1.c DHCP relay and server
3.1.d DHCP protocol operations
3.2 Troubleshoot IPv6 addressing and subnetting
3.2.a Unicast
3.2.b EUI-64
3.2.c ND, RS/RA
3.2.d Autoconfig (SLAAC)
3.2.e DHCP relay and server
3.2.f DHCP protocol operations
3.3 Troubleshoot static routing
3.4 Troubleshoot default routing
3.5 Troubleshoot administrative distance
3.6 Troubleshoot passive interfaces
3.7 Troubleshoot VRF lite
3.8 Troubleshoot filtering with any protocol
3.9 Troubleshoot between any routing protocols or routing sources
3.10 Troubleshoot manual and autosummarization with any routing protocol
3.11 Troubleshoot policy-based routing
3.12 Troubleshoot suboptimal routing
3.13 Troubleshoot loop prevention mechanisms
3.13.a Route tagging, filtering
3.13.b Split-horizon
3.13.c Route poisoning
3.14 Troubleshoot RIPv2
3.15 Troubleshoot EIGRP neighbor relationship and authentication
3.16 Troubleshoot loop free path selection
3.16.a RD, FD, FC, successor, feasible successor
3.17 Troubleshoot EIGPR operations
3.17.a Stuck in active
3.18 Troubleshoot EIGRP stubs
3.19 Troubleshoot EIGRP load balancing
3.19.a Equal cost
3.19.b Unequal cost
3.20 Troubleshoot EIGRP metrics
3.21 Troubleshoot EIGRP for IPv6
3.22 Troubleshoot OSPF neighbor relationship and authentication
3.23 Troubleshoot network types, area types, and router types
3.23.a Point-to-point, multipoint, broadcast, nonbroadcast
3.23.b LSA types, area type: backbone, normal, transit, stub, NSSA, totally stub
3.23.c Internal router, backbone router, ABR, ASBR
3.23.d Virtual link
3.24 Troubleshoot OSPF path preference
3.25 Troubleshoot OSPF operations
3.26 Troubleshoot OSPF for IPv6
3.27 Troubleshoot BGP peer relationships and authentication
3.27.a Peer group
3.27.b Active, passive
3.27.c States and timers
3.28 Troubleshoot eBGP
3.28.a eBGP
3.28.b 4-byte AS number
3.28.c Private AS

4.0 VPN Technologies 5%

4.1 Troubleshoot GRE

5.0 Infrastructure Security 5%

5.1 Troubleshoot IOS AAA using local database
5.2 Troubleshoot device access control
5.2.a Lines (VTY, AUX, console)
5.2.b Management plane protection
5.2.c Password encryption
5.3 Troubleshoot router security features
5.3.a IPv4 access control lists (standard, extended, time-based)
5.3.b IPv6 traffic filter
5.3.c Unicast reverse path forwarding

6.0 Infrastructure Services 5%

6.1 Troubleshoot device management
6.1.a Console and VTY
6.1.b Telnet, HTTP, HTTPS, SSH, SCP
6.1.c (T) FTP
6.2 Troubleshoot SNMP
6.2.a v2
6.2.b v3
6.3 Troubleshoot logging
6.3.a Local logging, syslog, debugs, conditional debugs
6.3.b Timestamps
6.4 Troubleshoot Network Time Protocol(NTP)
6.4.a NTP master, client, version 3, version 4
6.4.b NTP authentication
6.5 Troubleshoot IPv4 and IPv6 DHCP
6.5.a DHCP client, IOS DHCP server, DHCP relay
6.5.b DHCP options (describe)
6.6 Troubleshoot IPv4 Network Address Translation (NAT)
6.6.a Static NAT, Dynamic NAT, PAT
6.7 Troubleshoot SLA architecture
6.8 Troubleshoot tracking objects
6.8.a Tracking objects
6.8.b Tracking different entities (for example, interfaces, IPSLA results)

2 thoughts on “300-135 TSHOOT Troubleshooting and Maintaining Cisco IP Networks (TSHOOT)

  1. Bom dia.
    Gostaria de comprar os estudos do exame 300-115 mas como vou receber ? E qual é o contato da empresa telefone ou email caso seja necessário entrar em contato com os senhores ?

    • Hi, thanks for visiting my site for your 300-115 test. Once you completed your order from my side, we will send the product through mail. More, you can contact me through ccnp300-115@hotmail.com. If have any questions, just contact me freely.

Leave a Reply

Your email address will not be published. Required fields are marked *


*